This Post will Indeed be met with mixed reactions as some people will be disappointed because they are not using a strong decoder.
However what i want to assure you hear is that this guide that am about to write on how to enable cccam on strong decoders, will indeed be
applicable to almost all other
cccam enabled decoders. Am
using strong decoder because it is one of the most popular and cheapest decoders we have around, it also has the simplest interface. I won’t bore us about
telling us what a Cccam account
is, I will simply go to d business of how you can manually set up all that is required for you to watch satellite television a Cccam account even if you are a first timer.
WHAT YOU NEED TO GET
READY BEFORE YOU USE CCCAM ACCOUNT ON YOUR STRONG DECODER:
Before you can make use of
your newly acquired strong 4922 decoder to watch encrypted
channels using a cccam account,
the following prerequisite must
be available;
A router of any port as long as it has a lan port (I
will recommend a vodafone
router here because a
vodafone router can make use of edge and it comes with its own modem)
A sim card of any nework of
your choice, loaded with an
active data plan (cccam will
not consume more than 30mb monthly)
A strong 4922A Decoder orw Newer
A Good Cccam account.
Now that you have bought all
you need to setup your strong with cccam, join me in enumerating the procedures for carrying out the same;
1. The first thing you need to do is for you to press 8281 on your strong remote controller to see if a window containing the
cccam columns will appear.
(If it doesn’t appear, simply
download and install manually, my cccam module for strong CS_Module_200p_New_GSCAM)
Once you have installed this and you press 8281 a window like the one below
will pop
Now as you can see you need to change some things, what you will first do is to press OK on your remote and make sure you
edit the server list appropriately as shown below
From the above, you can see that you are only
required to fillin four things namely USERNAME / ID,
PASSWORD,
ADDRESS and
PORT (These are exactly what your cccam provider will sell to you) when you are done editting, press exit on your remote in order to save your settings to connect your server and be
online, click the red button
on your remote.
However, before your cccam will be online, your decoder must
be connected to the internet.
Todo this, you
must first connect your router with the modem attached to it to a computer using the Lan cable that came with the router and
manually create an access point number based on the network you wish to use.
E.g MTN nigeria APN is :
web.gprs.mtnnigeria.net.
To set up your router is very easy simply consult the manual that came with it. the default password is always admin.
Once you are done with this, you can try if your decoder has successfully
established a connection
with your decoder by
browsing some of the inbuilt
channels like youtube on it.,
then you can go ahead and connect your cccam server.
This time all your encrypted
channels will open, providing you have a good
internet connection.
REASONS WHY MOST PEOPLE LOST THEIR CCCAM ACCOUNTS:
The reason why some cccam
users may loose their account
before its expiry day is divided
into two;
1. Fault from seller and
2. Fault from user
The error from the seller simply
involves selling the same
account to two people why the
mistaken from the user is due to either curiosity or ignorance.
Cccam usage has only one hard
and fast rule and it is
“No Sharing, No Double Login,
One Box, One Decoder. Once a
user buys from a reliable person, and he or she keeps with the rule, you will use you account till the last day.
However what i want to assure you hear is that this guide that am about to write on how to enable cccam on strong decoders, will indeed be
applicable to almost all other
cccam enabled decoders. Am
using strong decoder because it is one of the most popular and cheapest decoders we have around, it also has the simplest interface. I won’t bore us about
telling us what a Cccam account
is, I will simply go to d business of how you can manually set up all that is required for you to watch satellite television a Cccam account even if you are a first timer.
WHAT YOU NEED TO GET
READY BEFORE YOU USE CCCAM ACCOUNT ON YOUR STRONG DECODER:
Before you can make use of
your newly acquired strong 4922 decoder to watch encrypted
channels using a cccam account,
the following prerequisite must
be available;
A router of any port as long as it has a lan port (I
will recommend a vodafone
router here because a
vodafone router can make use of edge and it comes with its own modem)
A sim card of any nework of
your choice, loaded with an
active data plan (cccam will
not consume more than 30mb monthly)
A strong 4922A Decoder orw Newer
A Good Cccam account.
Now that you have bought all
you need to setup your strong with cccam, join me in enumerating the procedures for carrying out the same;
1. The first thing you need to do is for you to press 8281 on your strong remote controller to see if a window containing the
cccam columns will appear.
(If it doesn’t appear, simply
download and install manually, my cccam module for strong CS_Module_200p_New_GSCAM)
Once you have installed this and you press 8281 a window like the one below
will pop
Now as you can see you need to change some things, what you will first do is to press OK on your remote and make sure you
edit the server list appropriately as shown below
From the above, you can see that you are only
required to fillin four things namely USERNAME / ID,
PASSWORD,
ADDRESS and
PORT (These are exactly what your cccam provider will sell to you) when you are done editting, press exit on your remote in order to save your settings to connect your server and be
online, click the red button
on your remote.
However, before your cccam will be online, your decoder must
be connected to the internet.
Todo this, you
must first connect your router with the modem attached to it to a computer using the Lan cable that came with the router and
manually create an access point number based on the network you wish to use.
E.g MTN nigeria APN is :
web.gprs.mtnnigeria.net.
To set up your router is very easy simply consult the manual that came with it. the default password is always admin.
Once you are done with this, you can try if your decoder has successfully
established a connection
with your decoder by
browsing some of the inbuilt
channels like youtube on it.,
then you can go ahead and connect your cccam server.
This time all your encrypted
channels will open, providing you have a good
internet connection.
REASONS WHY MOST PEOPLE LOST THEIR CCCAM ACCOUNTS:
The reason why some cccam
users may loose their account
before its expiry day is divided
into two;
1. Fault from seller and
2. Fault from user
The error from the seller simply
involves selling the same
account to two people why the
mistaken from the user is due to either curiosity or ignorance.
Cccam usage has only one hard
and fast rule and it is
“No Sharing, No Double Login,
One Box, One Decoder. Once a
user buys from a reliable person, and he or she keeps with the rule, you will use you account till the last day.